附近单身美女电话联系方式

(+86) 512-5631 6166
chuzhongwen@163.com
News & Blog
You are here: Home >> NEWS >> Question Answer >>
Attention to Automatic Filling Production Line

The main drive of the automatic filling production line adopts gear transmission and open type combined transmission, which has high efficiency, low noise, long service life, convenient maintenance and sufficient lubrication. The main motor speed is controlled by the frequency converter, and the automatic filling machine adopts the stepless frequency converter. Speed adjustment. The guiding bottle system has a simple structure and can be quickly and easily changed according to the bottle type. The automatic filling production line adopts a card bottleneck structure for conveying. When the front cover enters the slideway, it can smoothly enter the feed tray. To prevent accidents, an anti- reverse cover dial is also arranged on the slide rail to ensure that the cover that enters the feed tray is correct, and a pair is also arranged on the slide rail. The photoelectric switch stops the main unit immediately when it detects no cover.

automatic-filling-production-line

Check whether the various components of the automatic filling machine are abnormal or loose, the lubrication condition of the gears and conveyor belts, and whether the working power supply has leakage. This will extend the life of the filling machine. First of all, cut off the power supply and stop running to avoid more serious damage to the filling machine. Do not use water for cleaning, but use a special cleaning agent to clean it. This is because, due to the corrosion of acid and alkali in the filling process, the filling port is easy to rust, the cleaning agent can effectively remove the rust, the cleaning agent is evenly applied on the surface of the filling machine, and then the wet cloth is slow. Slowly wipe and clean the filling machine body in the automatic beverage filling production line. The sponge is then used to blot the liquid from the surface of the filling machine. A filling pipe is installed in the center of the main machine rack, the filling pipe is connected with the quantitative feeding device, the film feeding mechanism frame is suspended on the main frame, the film roll is installed in the lower part of the film feeding mechanism, and the film is supplied from the upper part of the film roll. A film supply motor is mounted on the mechanism frame, and a pendulum type storage membrane mechanism is installed on the upper part of the film supply mechanism frame.

Category: Question Answer

Leave a Reply

Your email address will not be published. Required fields are marked *

Leave a Reply

Your email address will not be published. Required fields are marked *

网站地图